地址：濟南市高新區漢峪金谷A5-2棟
電話：15066665432
傳真：0531-88984022
聯系人：殷經理
郵箱：jnyygt@126.com
網址：m.jdsdmh.cn
濟鋼代理商鋼板切割前，如果鋼板存在殘余應力會對切割效果造成什么影響？可以采取哪些措施來徹底解決？
Before the steel plate cutting of Jigang, if the residual stress existed in the steel plate, what would be the effect on the cutting effect? What measures can be taken to completely solve this problem?
1、濟鋼代理商在鋼板切割前，如果鋼板中有殘余應力的話，那么，當鋼板經過切割后，會出現翹曲現象，從而，大大影響到切割質量。至于該問題的具體解決措施，則可以進行冷矯直，來改善鋼板上殘余應力的分布情況，讓其內應力均勻化，這樣，可以來很好解決了。
1 、 before the steel plate cutting, if there is residual stress in the steel plate, then, when the steel plate is cut, the warping phenomenon will occur, which will greatly affect the quality of the cutting. As for the concrete solution to the problem, cold straightening can be carried out to improve the distribution of residual stress on the steel plate, so that the internal stress should be homogenized so that it can be solved well.
2、鋼板切割中的下料，是否一定要采用數控下料？
2, steel cutting in the blanking, is it necessary to use CNC cutting?
鋼板切割的下料方式，濟鋼代理商是有人工下料和數控下料這兩種。至于選用哪種，還是要看具體情況。不過，在工作效率上，是數控下料好于人工下料，但其價格，是要高一些的。
Cutting method of steel plate cutting, Jinan Iron and steel agents are manual blanking and CNC blanking of these two. As for the choice of which, or depends on the specific circumstances. However, in terms of efficiency, CNC cutting is better than manual cutting, but the price is higher.
3、鋼板切割與鋼板零割，有區別嗎？
3, steel cutting and plate zero cut, there is a difference?
鋼板切割與鋼板零割，濟鋼代理商將這兩個進行比較的話，那么，肯定是有不同之處的。不過，在切割方式上，則是差不多的，都可以使用半自動火焰切割、全自動數控切割以及激光切割等來進行。而且，在切割厚度范圍上，是為20—650mm。
Steel cutting and plate zero cut, Jinan Iron and steel agents will compare the two, then there must be a difference. However, the cutting method is about the same, can be used semi-automatic flame cutting, automatic NC cutting and laser cutting, etc.. Also, in the cutting thickness range, it is 20 - 650mm.
以上的介紹，您了解了嗎？如果您有不明白的地方，歡迎您的致電，我們?nèi)鏋槟榻B，歡迎您的蒞臨參觀哦。
Have you got the above information? If you do not understand the place, you are welcome to call, we are fully introduced to you, you are welcome to visit here.