日本三级韩国三级美三级91_奇米影视亚洲春色_日韩免费精品_天天操免费视频_日本免费黄色网址_性视频在线

提到抗震鋼筋大部分人肯定并不陌生。而抗震鋼筋的使用范圍就從字面意思上理解即是符合國家抗震要求及標準的鋼筋。在近幾年全球各地質災害頻繁發生，推廣使用抗震鋼筋也已經成為人們關注的焦點。而只有抗震鋼筋才能在一定強度的地址災害中起到保護人們財產安全的作用。因此，了解抗震鋼筋、使用抗震鋼筋應該是全民共同學習的重點。
Most people said that the seismic reinforcement is not strange. The scope of the use of seismic reinforcement from the literal meaning is consistent with the national seismic requirements and standards of steel. In recent years, the global geological disasters occur frequently, the use of seismic reinforcement has become the focus of attention. Only the seismic reinforcement can play a role in protecting the property safety of the people in a certain intensity of address. Therefore, to understand the seismic reinforcement, the use of seismic reinforcement should be the focus of the study of the whole people.
對于有抗震設防要求的建筑結構，其縱向受力鋼筋的性能應當滿足設計要求。當設計沒有具體要求時。對按二、三、四級抗震等級設計的框架和斜撐構件（含梯段）中的縱向受力鋼筋應該采用HRB335、HRB400E、HRB500等鋼筋，其強度和最大力下總伸長率的實測值應該符合相關標準。

The performance of the longitudinal reinforced bars shall meet the design requirements of the building structure with seismic fortification requirements. When there is no specific requirements for design. In two or three, the framework of seismic grade four and the design of diagonal members (including ladder) longitudinal reinforcement should be used HRB335, HRB400E and HRB500 in the steel, should comply with the relevant standards of the measured intensity and percentage total elongation at maximum force value.
1、鋼筋的抗拉強度實測值與屈服強度實測值的比值不應該小于1.25屈強比。
1, the ratio of the tensile strength and the yield strength of the steel bar should not be less than 1.25.
2、鋼筋的屈服強度實測值與屈服強度標準值的比值不應該大于1.30超強比。
2, the yield strength of reinforcement and the yield strength of the standard value of the ratio should not be greater than 1.30.
3、鋼筋的最大力下總伸長率不應該小于9%。
3, the total elongation of steel bar under the maximum force should not be less than 9%.
從上述的描述來看，抗震鋼筋的使用范圍主要是在框架構件和斜撐構件的主筋中。而當前HRB335鋼筋已經被市場淘汰。取而代之最常見的抗震鋼筋是HRB400E和HRB500即三級和四級鋼筋。
From the above description, the use of seismic reinforcement is mainly in the frame member and the main reinforcement of the diagonal brace member. And the current HRB335 steel has been eliminated by the market. Replaced the most common seismic reinforcement is the HRB400E and HRB500 that is, three and four.
有了上面的小總結，希望對廣大客戶有所幫助，如果有什么不理解的或者尋求幫助的請點擊我們的官方網站：濟鋼一級代理或者來電咨詢，我們會盡全力為您解決
There is a small sum above, hope to help customers, if what you do not understand or seek help please click on our official website: Jinan an agent or contact us, we will do our best for you to solve